Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

$110.00
Pro performance post A seatpost should do one thing well — hold your seat. Our new carbon fiber Pro seatpost does that and more with a reliable 2-bolt design that lets you swap saddles with ease. Great for road or mountain use and available in a slew of diameters, lengths and offsets, this post gives you the setup versatility you've always wanted. - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - OCLV carbon fiber shaft - Forged 6061-T6 alloy head with OCLV carbon fiber top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
$41.99
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
$85.00
- Giant proprietary D-Fuse seatpost - Composite construction with Alloy clamp - Zero offset configuration - 380mm length
$160.00 - $184.00
Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever
$200.00 - $210.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$99.95
Bike fit is important - a bike should feel like an extension of the body, especially when dialed in. Getting just the right saddle position is second-to-none when putting out power over long miles is concerned. Ritchey Link posts offer two clamp positions for greater adjustability in dialing in the right fit. - 7050 Alloy 2pc Press Fit Head - 15mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Finish: BB black
$40.00
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
$25.00
- Straight-gauge 6061-T6 alloy shaft construction - 2-bolt rocker-head with micro-adjustment - Suitable for road or mountain use
$29.99
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
$100.00
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
$18.99 - $20.00
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
$25.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
$309.00 - $310.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
$199.99
The all-new XXX Seatpost is still Bontrager's lightest carbon post, but it's been redesigned with the new CnD shape profile for a more controlled and forgiving ride experience. - CnD shape profile increases torsional stiffness and vertical compliance - Designed to offer increased compliance at maximum and minimum insertion points - 2-bolt design offers independent setback and tilt adjustments (+/- 12 degrees) - 100% OCLV Carbon fiber shaft and head - Includes 7x7mm round rail clamp compatibility - Carbon 7x10mm saddle ears sold separately
$60.00
The Elite seatpost is a distilled design guaranteed to deliver reliable everyday performance for years to come. Perfect as a replacement or your next upgrade. With an alloy body and a 2-bolt micro adjust head, this seatpost is available in a slew of diameters, lengths, and offsets to get you the right position. Key features: - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - Constructed of 2014 alloy - Forged 6061-T6 alloy head, top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
$20.00 - $26.00
• Forged aluminum • Integrated micro-adjust seat clamp
$359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$140.00 - $160.00
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
$60.00
- Length: 400mm - Offset: 0mm - Clamp Style: Standard Rails - Material: Aluminum
$176.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Page 1 of 1